Clean T 19" Rear Disc Wheel

Clean T 19" Rear Disc Wheel

Description and materials
- Clean T 19” bike trials rear wheel.
- Clean T 19” 47mm 32H rear rim, with single-wall design and triangular holes.
- Clean X2 Disc 32 spokes rear hub, with sealed bearings and standard 6-bolt rotor mounts.
- 1.8mm spokes, built with 3-cross lacing for increased stiffness.
- Sapim 14G 1.8mm spoke nipples, made of ultralight aluminium alloy.
- Supplied with a free TrialBikes Ultralight rim tape already installed.

Includes
- Clean T 19” 47mm 32H rear rim
- Clean X2 disc rear hub
- 1.8mm Clean spokes
- Sapim 14G 1.8mm spokes
- TrialBikes Ultralight rim tape

Compatible with:
- Frames with 116mm spacing for the rear hub that don’t require snail cams.
- For 116mm frames with snail cams, the spacers on this hub must be modified or replaced by some narrower, so that the total spacing after adding the snail cams is still 116mm. Jitsie’s hub spacers are ideal for this task.
- Compatible with IS 6-bolt rotors.
- Compatible with screw-on sprockets and freewheels with standard 1.37”x24tpi thread.
- Note: this hub uses NBK 6000-2RS bearings on both sides.

Colors
- Rim: anodized black
- Hub: anodized black
- Spokes: black
- Spoke nipples: anodized red
- Rim tape: silver

Weight
- 664.06g (+ bolts and washers at 17.7g)