Clean X2 19'' V2 Disc Wheel

Description and materials
- New version of the complete rear disc wheel from Spanish brand Clean.
- Now, this wheel is built with the new Clean 19” V2 rim, specially designed for disc brakes, with thinner walls and lighter design, which helps save weight without compromising its strength.
- Clean X2 32H rear disc hub, in black, with sealed bearings and standard 6-bolt ISO rotor mounts.
- High quality Sapim 1.8 spokes, in black, built with a 3-cross lacing on both sides to achieve the highest strength possible.
- Sapim 15G spoke nipples, in red, made of aluminium alloy, which helps save a considerable amount of weight.
- The axle has 116mm spacing, so it’s compatible with those trials frames that don’t use snail cam chain tensioners. If you’d like to install snail cams, then you must replace the 4mm spacers by some 1mm ones. This will allow you to install 3mm snail cams on each side of the hub.
 - Includes an ultra-light, reinforced rim tape.

Compatible with:
- Those frames with 116mm spacing between dropouts, that don’t require snail cams. If you’d like to install snail cams, then you must replace the 4mm spacers by some 1mm ones. This will allow you to install 3mm snail cams on each side of the hub.
- Any rotors with standard 6-bolt ISO mounts.
- Screw-on sprockets and freewheels with standard 1,37”x24tpi thread.
- Note: the hub on this wheel uses NBK 6000-2RS bearings on both sides.

Includes
- Clean X2 19” V2 47mm 32H rear rim
- Clean X2 116mm disc hub
- Sapim 1.8 spokes
- Sapim aluminium nipples
 - Ultra light reinforced rim tape

Finishes
- Anodized black rim
- Anodized black hub, with silver laser etched Clean logo.
- Black spokes
- Red spoke nipples

Weight
- 663.3g, + bolts and washers at 17.7g.