Monty 221Ti 36H Disc Rear Hub

Description and materials
- High quality rear disc hub from Spanish brand Monty, the one supplied with Monty 221Ti bikes.
- Features a 105mm spacing, specifically designed for using with Monty frames, which have a narrower spacing than most trials frames.
- The hub shell is made from a single piece of high quality aluminium alloy.
- Standard 1.37”x24tpi thread, with a 35mm diameter, compatible with most screw-on freewheels and sprockets.
- Features high quality replaceable sealed bearings, which ensure a smooth running while keeping out all the dirt (mud, water, dust, etc.).
- Designed for using with 3mm snail cams (2x3mm) to obtain a 105mm spacing, specially designed for Monty frames and those with this shorter spacing (get in touch if you have any doubts!).
- The snail cams must have a 10mm-diameter hole for the axle, like Monty, Clean, Trialtech, Neon or Jitsie snail cams.
- International Standard 6-bolt disc mounts.
- Available with 36 holes, in anodized black, with white Monty graphics.
- Supplied with M6x23mm bolts and serrated washers to ensure the wheel stays in place.

Sizes
- Spacing: 105mm
- 36 holes

Finishes
- Anodized black, with white Monty graphics

Weight
- 195g (+ bolts and washers at 30g).

Additional information
Make sure your rim has 36 holes to fit this hub.
You must use a chain tensioner with a 10mm-diameter hole for the axle, like Monty, Clean, Trialtech, Neon or Jitsie snail cams.
If you have any questions, contact us.