Clean X2 19'' Rear Disc Wheel

Clean X2 19'' Rear Disc Wheel

- New high quality Clean X2 19” rear disc complete wheel.
- Featuring the new Clean 19” 48mm rear rim, in black, with deep l-beam extrusion to provide extra stiffness, which helps improve braking performance both with rim and disc brakes.
- Clean X2 32H rear disc hub, in black, with sealed bearings and standard 6-bolt ISO rotor mounts.
- High quality Sapim 1.8 spokes, in black, built with a 3-cross lacing on both sides to achieve the highest strength possible.
- Sapim 14G spoke nipples, in red, made of aluminium alloy, which helps save a considerable amount of weight.
- The axle has 116mm spacing, so it’s compatible with those trials frames that don’t use snail cam chain tensioners. If you’d like to install snail cams, then you must replace the 4mm spacers by some 1mm ones. This will allow you to install 3mm snail cams on each side of the hub.
- Available with black rim, spokes and hub, and red nipples.

Compatibility
- Compatible with those frames with 116mm spacing between dropouts, that don’t require snail cams. If you’d like to install snail cams, then you must replace the 4mm spacers by some 1mm ones. This will allow you to install 3mm snail cams on each side of the hub.
- Compatible with all rotors that have standard 6-bolt ISO mounts.
- Compatible with screw-on sprockets and freewheels with standard 1,37”x24tpi thread.
- Note: the hub on this wheel uses NBK 6000-2RS bearings on both sides.

Includes
- Clean 19” 48mm 32H rear rim
- Clean X2 116mm disc hub
- Sapim 1.8 spokes
- Sapim 14G aluminium nipples

Finishes
- Anodized black rim
- Anodized black hub, with silver laser etched Clean logo.
- Black spokes
- Red spoke nipples

Weight
- 666.70g, + bolts and washers at 17.7g.