Clean X2 19'' Rear Non-Disc Wheel

Description and materials
- New high quality Clean X2 19’’ rear non-disc complete wheel.
- Featuring the new Clean 19’’ 48mm rear rim, in black, with deep l-beam extrusion to provide extra stiffness, which helps improve braking performance.
- Clean X2 32H rear non-disc hub, in black, with sealed bearings.
- High quality Sapim 1.8 spokes, in black, built with a 3-cross lacing on both sides to achieve the highest strength possible.
- Sapim 14G spoke nipples, in red, made of aluminium alloy, which helps save a considerable amount of weight.
- The axle has 110mm spacing, so if you install 3mm snail cams you’ll get the 116mm spacing needed for most 20” frames.
- In case you won’t be using snail cams, you must replace the 1mm spacers included with the hub by some 4mm ones (not supplied). This way you’ll get the 116mm spacing as well.
- Available with black rim, spokes and hub, and red nipples.

Compatibility
- Compatible with those frames with 116mm spacing between dropouts, installing snail cams. In case you won’t be using snail cams, you must replace the 1mm spacers included with the hub by some 4mm ones (not supplied). This way you’ll get the 116mm spacing as well.
- Compatible with screw-on sprockets and freewheels with standard 1,37”x24tpi thread.
- Note: the hub on this wheel uses NBK 6000-2RS bearings on both sides.

Includes
- Clean 19” 48mm 32H rear rim
- Clean X2 HS 116mm non-disc hub
- Sapim 1.8 spokes
- Sapim 14G aluminium nipples

Finishes
- Anodized black rim
- Anodized black hub, with silver laser etched Clean logo.
- Black spokes
- Red spoke nipples

Weight
- 629.78g, + bolts and washers at 17.7g.